Compact Shore Casting Jigs 30g-120g PROBEROS Sinking for Sea Bass Mackerel

PROBEROS Compact Shore Casting Jigs 30g-120g

A short, compact metal jig for shore and surf casting with metal, sized 30g-120g (1.06-4.23 oz) in 5 finishes. Offshore jigging anglers working slow pitch over structure fish it in mid to deep ground from 30 m to 80 m.

A hard multi-layer finish that holds up to reef and teeth, so the jig keeps working in the conditions where the fish are actually feeding. Every number in the table below is measured from the production jig, not rounded up for the listing.

Technical Specifications

Model: see options  |  Material: High-density lead with hard coat  |  Water: Saltwater  |  Colors: 5

Weights, lengths and hook sizes are the factory figures for this model. Smaller weights sit shorter, larger weights sit longer - pick the weight for depth and current, not for looks.

Finishes & Color Options

Available in 5 colors (A, B, C, D, E). Every color is finished with the same hard multi-layer coat, so the only thing that changes between them is visibility - exactly what you want when you are matching light conditions.

A hard multi-layer finish that holds up to reef and teeth.

Fishing Scenarios & Technique

Working range: mid to deep ground from 30 m to 80 m. Match the leader to the teeth you expect - shore pelagics such as tailor cut light fluorocarbon, so step up or add wire.

How to work it: Cast as far as the rod allows, then wind fast with the rod tip pumping. Most shore pelagics want speed and an erratic dart, not a slow lift.

Tackle: PE 2.5-3.5 braid, 50-80 lb leader, a dedicated slow pitch or jigging rod. Match the weight to the drift: if the line streams away at a sharp angle, step up one weight class before you change anything else.

Typical sessions: offshore jigging anglers working slow pitch over structure - drift fishing over structure, slow vertical work under the boat, or casting where the bottom shallows out.

Regional Playbook

Australia & New Zealand

Drifting gravel, sand and reef edges in mid to deep ground from 30 m to 80 m is the standard play here. Keep the line near vertical, stay in contact with the bottom and re-drop the moment the drift runs out - mackerel are caught on the lift as often as on the fall.

Europe (UK / Germany / Norway)

Deep boat work over wrecks, reef edges and gravel banks - mid to deep ground from 30 m to 80 m. Long sweeping lifts beat short snaps on cold-water species, and a luminous finish earns its keep in deep or coloured water.

Japan

Offshore and bay jigging - mid to deep ground from 30 m to 80 m. Japanese crews name the targets Suzuki, Saba, and the same jig covers both the mid-water fish and the bottom fish that sit under them.

Korea

Boat jigging on the drift - mid to deep ground from 30 m to 80 m. Korean anglers work the same water for Nongeo, Godeungeo, with a slow steady retrieve and the rod tip low to keep the jig in the strike zone.

Rigging & Hardware

What you get: supplied as a blank jig body - pair it with a PROBEROS hand-tied feather assist hook.

Every PROBEROS assist hook set is hand-tied: high-strength PE braiding knotted onto the hook shank, then 80-100 tight wraps of fine thread, then locked with glue. Flash fibres are bound in with the wraps so the hook set glints and moves in the water. Each set is rated above 150 lb - if a hook straightens or snaps, the tie itself will not let go of the shank.

Check the tie and the hook point after every fish, and replace the set if the wraps have been cut. A spare set in the boat is cheaper than the fish you lose.

FAQ

What weights does the series come in?
30 g, 40 g, 60 g, 80 g, 100 g, 120 g (1.06-4.23 oz). Lengths run 6.5 cm to 9 cm, so you can step from mid-depth ground into deep water without changing the jig family.

Does it come rigged?
Supplied as a blank jig body - pair it with a PROBEROS hand-tied feather assist hook. Every PROBEROS hand-tied hook set is knotted and glued, never crimped.

How should I work it?
Mid to deep ground from 30 m to 80 m. Use cast as far as the rod allows, then wind fast with the rod tip pumping. Most shore pelagics want speed and an erratic dart, not a slow lift.

What will it catch?
Sea Bass, Inshore Predators, Mackerel. The hook sizes are matched to the weight, so sea bass and inshore predators are both realistic targets.

What tackle do I need?
PE 2.5-3.5 braid, 50-80 lb leader, a dedicated slow pitch or jigging rod. Mid to deep ground from 30 m to 80 m is the working range for this weight.

Care

Rinse the jig and the hook set in fresh water after every trip, dry them before storage, and touch up hook points with a file. Salt left on a tied assist hook is what kills the wraps first.