PROBEROS LF157 Kabura Jigs 60g-200g Luminous Glow for Amberjack Kingfish

PROBEROS LF157 Kabura Slider Jig, 60g to 200g

The PROBEROS LF157 Kabura Slider Jig is built for a slow lift and drop, or a dead-stick hover in saltwater and comes shown rigged with a hand-tied feather assist hook. It is available in 6 weights from 60g to 200g, so one lure family covers deep drops and heavy current without changing lures. The body is high-density lead head finished with a luminous finish and 3D eyes, in 5 colour options chosen to match local bait, light and water clarity. It is aimed squarely at Amberjack, Kingfish, Snapper, Grouper.

Size & Weight Specifications

Design, Finish & Build

• Body and core: high-density lead head in 6 weights from 60g-200g, built to sink true and stay stable through the fall.
• Finish: a glow-in-the-dark luminous coating that keeps working after dark, an imitation wing print, across 5 colour options (A, B, C, D, E) to match bait, light and water clarity.
• Hardware: silicone skirt + carbon steel double hooks as standard.
• Detail: 3D moulded eyes and etched scale relief that read as a wounded baitfish in low light.
• Attractor: a soft squid-style skirt that pulses, flares and holds water on the drop so the lure stays in the strike zone longer.

Usage Scenarios & How To Fish It

• Drift fishing for reef species with the jig nudging the seabed
• Deep structure fishing where a horizontal presentation matters
• Boat and rock ledge fishing over broken ground
• Bottom bouncing over sand, gravel and reef edges
• Technique: work the jig with a slow lift and drop, or a dead-stick hover. Let it fall with a slow, upright descent to the seabed on a slack line, then take up the slack before the next lift.
• Tackle: PE 4.0-6.0 braid and an 80-120 lb fluorocarbon leader, with a rod rated for the weight you are fishing.
• Heavy-water tip: keep the rod loaded and pump rather than crank, and re-tie the leader after every serious fish.

Target Species

Sized from 60g to 200g, this kabura slider jig is aimed at big pelagics and deep-water bottom fish: Snapper, Grouper, Kingfish, Amberjack, Sea Bass. Fish the lighter end of the range over pressured inshore ground and the heavier end when you are dropping into current over deep structure.

Local Names & Regional Playbook

• USA, Canada & Australia: fished as a kabura slider jig or bottom jig, drifted over reef and sand with the head tapping the seabed. Prime targets: Snapper, Grouper, Kingfish, Amberjack, Sea Bass.
• Europe (UK, Ireland, Norway, Germany, France): fished in deep water and around structure from a drifting boat. Prime targets: Sea Bass.
• Japan: a metal jig for boat jigging and slow jigging, locally called a metaru jigu. Prime targets there: Buri, Hiramasa.
• Korea: a metal jig for boat jigging, locally known as jigging. Prime targets there: Bangeo, Bushiri, Nongeo.

Hand-Tied Assist Hook Rigging

The jigs are rigged as pictured with a hand-tied feather assist hook, ready for the drop.

Every PROBEROS assist hook set is tied by hand, never crimped together by a machine. A high-strength PE braided main line is knotted down onto the hook shank, then wrapped with fine binding thread in 80-100 tight turns, locked with adhesive, and flash fibers are laid in during the wrapping so the leader reflects light and keeps moving in the water. Every finished set is built to hold 150 lb or more: even if the hook is straightened or snapped under load, the tied leader will not slip off the shank. That is the difference between landing the fish of the trip and losing it at the boat. Match the hook size to the jig weight and to the fish you are chasing.

Frequently Asked Questions

Which weight should I choose?

Match the weight to depth and current rather than to the size of the fish. This listing covers 60g through 200g: fish the light end in 10-30 m and over pressured fish, and the heavy end when you are dropping into 100 m plus with current running.

Is the assist hook included?

The jigs are rigged as pictured with hand-tied feather assist hooks. If you would rather run your own hook, message us and we will sort out a bare-body option for you.

How do I work this jig?

Let the jig reach the bottom or the target depth, then use a slow lift and drop, or a dead-stick hover. On slow pitch gear one long lift followed by a controlled fall does most of the work, so keep the line just tight enough to feel a take on the drop.

Will it hold up in saltwater?

Rinse the jig in fresh water after every session, dry it fully and store it out of direct sun. Check the split ring and the hook point each trip, and swap the assist hook once the point rolls over or the leader starts to fray.

Care & Storage

Rinse with fresh water and dry after every saltwater session, check the split ring and the hook after heavy structure contact, and store the jig in a box rather than loose in a bag so the finish stays sharp.