PROBEROS
PROBEROS LF152 Nástraha slow jigging 14g-40g, 3D oči, s assist háčikmi – morská voda
PROBEROS LF152 Nástraha slow jigging 14g-40g, 3D oči, s assist háčikmi – morská voda
Nepodarilo sa načítať dostupnosť na vyzdvihnutie
Prečo si vybrať PROBEROS? Doba dodania?
Prečo si vybrať PROBEROS? Doba dodania?
🚚 Doprava zdarma pri objednávke nad 100 $
Celkový odhadovaný čas dodania zahŕňa spracovanie objednávky (1-5 pracovných dní) a prepravnú dobu:
• Štandardná doprava: 7-20 pracovných dní
• Expresná doprava: 7-10 pracovných dní
Uvoľnite sa – váš balík je na ceste!
🛡️ 30-dňová záruka vrátenia peňazí
Plná refundácia pri vrátení nepoškodených produktov do 30 dní – z akéhokoľvek dôvodu. Keď tovar dorazí na náš sklad na kontrolu, spustí sa proces vrátenia peňazí.
✉️ Zákaznícka podpora navždy
Vždy sme tu pre vás.
Otázky? Napíšte nám na sales@proberos.com
PROBEROS LF152 3D Eye Micro Metal Jigs 14g-40g
A long, knife-cut metal jig for micro and light jigging, sized 14g-40g (0.49-1.41 oz) in 5 finishes. Shore and inshore boat anglers working light game on pelagics and reef fish fish it in inshore ground from 15 m to about 40 m.
Laser holographic foil that flips between two faces on the drop and throws contrast in every direction, so the jig keeps working in the conditions where the fish are actually feeding. Every number in the table below is measured from the production jig, not rounded up for the listing.
Technical Specifications
Model: LF152 | Material: High-Density Lead & High-Carbon Steel (Hooks) | Water: Saltwater, Deep Sea, Offshore | Colors: 5
| Weight | Ounces | Length | Hook size |
|---|---|---|---|
| 14 g | 0.49 oz | 7.4 cm | - |
| 17 g | 0.60 oz | 7.9 cm | - |
| 21 g | 0.74 oz | 8.5 cm | - |
| 28 g | 0.99 oz | 9.5 cm | - |
| 40 g | 1.41 oz | 10.8 cm | - |
Weights, lengths and hook sizes are the factory figures for this model. Smaller weights sit shorter, larger weights sit longer - pick the weight for depth and current, not for looks.
Finishes & Color Options
Available in 5 colors (A, B, C, D, E). The range is built for the way light changes with depth:
- Laser holographic foil that flips between two faces on the drop and throws contrast in every direction.
- 3D eyes that give the fish a fixed reference point to commit to.
- Scale-pattern foil that scatters light in every direction.
Fishing Scenarios & Technique
Working range: inshore ground from 15 m to about 40 m. Use a light leader and a small, sharp assist hook - the whole point of this weight class is finesse on pressured fish.
How to work it: Short sharp pitches with a fast sink between them, or a steady high-speed wind when fish are chasing. This weight class is worked on light braid so the jig keeps its action.
Tackle: PE 1.0-1.5 braid, 20-30 lb leader, an 8 ft - 9 ft light shore jigging or medium-light boat rod. Match the weight to the drift: if the line streams away at a sharp angle, step up one weight class before you change anything else.
Typical sessions: shore and inshore boat anglers working light game on pelagics and reef fish - drift fishing over structure, slow vertical work under the boat, or casting where the bottom shallows out.
Regional Playbook
USA & Canada
Worked over reefs, wrecks and bait balls - inshore ground from 15 m to about 40 m. Local crews fish this weight class in the tuna and yellowtail zone, so match the jig to the current rather than to the depth number alone.
Australia & New Zealand
Drifting gravel, sand and reef edges in inshore ground from 15 m to about 40 m is the standard play here. Keep the line near vertical, stay in contact with the bottom and re-drop the moment the drift runs out - snapper, yellowtail kingfish, grouper are caught on the lift as often as on the fall.
Europe (UK / Germany / Norway)
Deep boat work over wrecks, reef edges and gravel banks - inshore ground from 15 m to about 40 m. Long sweeping lifts beat short snaps on cold-water species, and a luminous finish earns its keep in deep or coloured water.
Japan
Offshore and bay jigging - inshore ground from 15 m to about 40 m. Japanese crews name the targets Madai (red seabream), Buri / Inada / Warasa, Maguro (tuna), and the same jig covers both the mid-water fish and the bottom fish that sit under them.
Korea
Boat jigging on the drift - inshore ground from 15 m to about 40 m. Korean anglers work the same water for Chamdom, Bangeo, Chamchi (tuna), with a slow steady retrieve and the rod tip low to keep the jig in the strike zone.
Rigging & Hardware
What you get: shown rigged with the hand-tied feather assist hook; check the option you order.
Every PROBEROS assist hook set is hand-tied: high-strength PE braiding knotted onto the hook shank, then 80-100 tight wraps of fine thread, then locked with glue. Flash fibres are bound in with the wraps so the hook set glints and moves in the water. Each set is rated above 150 lb - if a hook straightens or snaps, the tie itself will not let go of the shank.
Check the tie and the hook point after every fish, and replace the set if the wraps have been cut. A spare set in the boat is cheaper than the fish you lose.
FAQ
What weights does the LF152 come in?
14 g, 17 g, 21 g, 28 g, 40 g (0.49-1.41 oz). Lengths run 7.4 cm to 10.8 cm, so you can step from mid-depth ground into deep water without changing the jig family.
Does it come rigged?
Shown rigged with the hand-tied feather assist hook; check the option you order. Every PROBEROS hand-tied hook set is knotted and glued, never crimped.
How should I work it?
Inshore ground from 15 m to about 40 m. Use short sharp pitches with a fast sink between them, or a steady high-speed wind when fish are chasing. This weight class is worked on light braid so the jig keeps its action.
What will it catch?
Snapper, Kingfish, Tuna, Pike, Groupers and more. The hook sizes are matched to the weight, so snapper and kingfish are both realistic targets.
What tackle do I need?
PE 1.0-1.5 braid, 20-30 lb leader, an 8 ft - 9 ft light shore jigging or medium-light boat rod. Inshore ground from 15 m to about 40 m is the working range for this weight.
Care
Rinse the jig and the hook set in fresh water after every trip, dry them before storage, and touch up hook points with a file. Salt left on a tied assist hook is what kills the wraps first.
Zdieľať
